Realme C21Y RMX3261/RMX3263 Pattern&FRP Remove PAC File
Realme C21Y RMX3261/RMX3263 Pattern & FRP Remove File (.PAC): A Step-by-Step Tutorial Using SPD Upgrade Tool
Introduction:
The Realme C21Y RMX3261/RMX3263 is a budget-friendly smartphone that offers reliable performance and essential features. However, if you've forgotten your device's pattern lock or encountered a Factory Reset Protection (FRP) issue, you may find yourself locked out of your phone. In this article, we'll guide you through the process of removing the pattern lock and FRP using the SPD Upgrade Tool and a compatible .PAC file for the Realme C21Y RMX3261/RMX3263.
Before we begin:
Please note that the process of removing pattern lock and FRP involves resetting your device to factory settings, which will erase all data on your phone. Make sure you have a backup of all your important files before proceeding. Additionally, this method is intended for educational purposes only. Use it responsibly and at your own risk.
Requirements:
1. Realme C21Y RMX3261/RMX3263 device
2. USB cable
3. PC/Laptop with SPD Upgrade Tool installed
4. .PAC file specific to the Realme C21Y RMX3261/RMX3263 model
5. Stable internet connection
Step-by-Step Tutorial:
1. Download the required tools:
- Download and install the SPD Upgrade Tool on your PC/Laptop.
- Find and download the .PAC file specific to the Realme C21Y RMX3261/RMX3263 model. Ensure that it is from a trusted source.
2. Power off your device:
- Press and hold the power button until the "Power off" option appears on the screen.
- Tap on "Power off" and wait for the device to shut down completely.
3. Launch SPD Upgrade Tool:
- Open the SPD Upgrade Tool on your PC/Laptop.
4. Load the .PAC file:
- In the SPD Upgrade Tool, click on the "Load Packet" or "Browse" button.
- Locate and select the .PAC file you downloaded for the Realme C21Y RMX3261/RMX3263 model.
5. Start the flashing process:
- Once the .PAC file is loaded, click on the "Start Downloading" or "Play" button in the SPD Upgrade Tool.
- Connect your device to the PC/Laptop using a USB cable.
- Press and hold the Volume Up or Down button on your device while connecting it to the PC/Laptop.
- The tool will begin flashing the firmware to your device. This process may take a few minutes, so be patient and avoid interrupting it.
6. Remove USB cable and boot the device:
- Once the flashing process is complete, disconnect the USB cable from your device.
- Power on your Realme C21Y device by pressing the power button.
7. Set up your device:
- Follow the on-screen instructions to set up your device as you would during the initial setup.
Congratulations! You have successfully removed the pattern lock and FRP on your Realme C21Y RMX3261/RMX3263 using the
Download Link - (Gdrive)
Download Link - (Mirror)
Join telegram
